Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: For safety reasons, when vacuuming stairs, leave the vacuum cleaner on the bottom stair.
1.
Holding the power cord by the plug,
pull the cord out completely. Red tag
will indicate the end of the cord. Plug
into the outlet.
2.
All manuals and user guides at all-guides.com
2.
For easier handling while
vacuuming, hook the power
cord onto the power cord
hook.
Brush Vacuuming on carpeted floors:
• The brushroll is switched on or off using
the brushroll on/off switch (Diagram 2).
Switch brushroll on for carpeted floors.
• The rotating brushroll loosens deeply
embedded dirt and brings it to the surface.
Vacuuming on smooth surfaces and
above floor cleaning:
• Switch brushroll off to obtain the
best results when vacuuming smooth
barefloor surfaces and for above floor
cleaning.
3.
Switch the vacuum cleaner on
or off by pressing the on/off
switch.
BRUSHROLL RESET
If something becomes lodged and
3.
brushroll shuts off, turn cleaner
off and remove obstruction. Once
the problem has been fixed, the
vacuum cleaner can be switched
back on again after approximately
2 minutes by pressing the reset
button.
RESET BUTTON
BRUSH VACUUMING
1.
Tilt the upright vacuum
cleaner back before you
start vacuuming. At the
same time, use your foot
to press the nozzle down
onto the carpet.
7
Publicidad
