Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
CHANGING THE LIGHTBULB
This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-321-1134 or your local auto parts store.
1.
Make sure vacuum has been
switched off and unplugged
before changing light bulb.
Also, allow the light bulb
to cool. Remove the two
screws and remove the light
cover.
DEBRIS REMOVAL/POWER BRUSH TOOL
1.
LOCKING RING
Rotate locking ring 180˚ and
turn Power Brush Tool over.
All manuals and user guides at all-guides.com
2.
Remove the burned out light
bulb and pull it from the
socket.
2.
Pivot lower housing and
remove clog.
3.
Insert new bulb.
3.
To reassemble, be sure tabs
are engaged. Pivot the lower
housing closed.
4.
Attach the light cover using both
screws.
13
Publicidad
