Quick Start - NuWave INFINITY 28202 Manual Del Propietário

ASSEMBLY GUIDE
WARNING
WARNING: As with most electrical appliances, electrical
parts are live even when the Infinity
sure the Infinity Blender is unplugged when assembling.
™
Using the Plunger
Remove the Plunger Cap from the Plunger Lid before inserting the
Plunger. The Plunger Lid is designed with the hole opening so that
the Plunger does not come into contact with blades when moving
ingredients around. When not using the Plunger, place the Plunger
Cap in the Plunger Lid by pressing down.
Plunger
Jar Assembly with the Plunger Lid
Place the Jar on the Base by
1.
aligning it on top of the 4 Rubber
Columns.
Press the Lid firmly down onto
2.
the Jar.
12
assembly
Blender is off. Make
™
4 Rubber
Columns

QUICK START

1
Blending times and speeds can be adjusted before and during
the blending process. Press the up and down arrows or turn
the dial to set or adjust.
Turn the Infinity Blender ON and OFF.
™
Turn the red main Base Power Switch ON. Switch is located on the
right side of Blender Base. Press Power button once to turn your
Infinity Blender on. Press the Power button again and press the
™
red main Base Power Switch OFF to turn your Infinity Blender
Start blending. The LED display will show the default time for
your selected setting.
Turn the dial to choose your appropriate blending function. Press
Start/Pause to start blending. Press Start/Pause again to stop
blending.
Note: Do not fill Jar above ¾ capacity. For best results, do not fill more
than 1.5 liters (51 fl oz) of liquid. Refer to "Instructions" for more.
Set your time. Press the up and down arrows to increase or
decrease the time on the display.
Times are displayed in minutes and seconds. Adjustments can be
made on all settings.
0
2
off.
™
13
nuwavenow.com