How To Enable Voice Over Ip On Your Network; How To Configure Upnp - Linksys EA2750 Guia Del Usuario

How to enable Voice over IP on your network

VoIP (Voice over Internet Protocol) is a technology for using the Internet as an interface for telephone
communications. To use VoIP, you need to get an account with a VoIP service provider. The VoIP
service provider typically provides you with a telephone adapter that connects to your network. If you
do not use your network to make phone calls, you don't need to change the default settings.
The Application Layer Gateway SIP (Session Initiation Protocol) allows SIP packets, used by some
VOIP service providers, to get through your router's firewall.
To configure the router for VoIP:
1. Log in to Linksys Smart Wi-Fi. (See ''How to connect to Linksys Smart Wi-Fi'' on page 10.)
2. Under Router Settings, click Connectivity, then click the Administration tab.
3. Select the SIP checkbox under Application Layer Gateway if your VoIP service uses SIP.
Deselect the SIP checkbox If your VoIP service uses other NAT traversal solutions such as
STUN (Session Traversal Utilities for NAT), TURN (Traversal Using Relay NAT), or ICE
(Interactive Connectivity Establishment).
Note---- - You may need to contact your VoIP service provider to determine the type of NAT
traversal configuration they use.

How to configure UPnP

UPnP (Universal Plug and Play) allows devices connected to a network to discover each other and
automatically create working configurations. Examples of UPnP-capable devices include web
cameras, online gaming applications, and VoIP devices. UPnP is enabled by default.
To configure UPnP:
1. Log in to Linksys Smart Wi-Fi. (See ''How to connect to Linksys Smart Wi-Fi'' on page 10.)
OR
46