Saivod LVM47 Manual De Instrucciones página 90

( )
Means: need to fill rinse into the Rinse-Aid Dispenser.
Cycle Selection Cycle Selection
Program Program
Information Information
For heaviest soiled crockery,
Intensive
and normally soiled pots pans
dishes etc with dried on soiling.
This is standard programme, it is
suitable to clean normally soiled
tableware and it is the most efficient
programme in terms of its combined
(*EN5 0242)
energy and water consumption for
that type of tableware.
90 Min For lightly soiled loads that
do not need excellent drying
efficiency.
A shorter wash for lightly
Rapid
soiled loads and quick
wash.
*EN 50242 : This programme is the test cycle. The information for comparability test
Starting a cycle wash
1 Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
"
Loading the Dishwasher ).
2 Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
3 Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4 Close the door, press the On/Off button.
5 Press the program button , the wash program will be changed as follows direction:
ECO->90 Min->Rapid->Intensive-> ECO;
Then press the Start/Pause button, the dishwasher begins to start.
Description Description
of Cycle of Cycle
Prewash 50
Wash 60
Rinse
Rinse
Rinse 70
Drying
Pre-wash
Wash (45
Rinse(65 )
Drying
Wash(65 )
Rinse
Rinse (65 )
Drying
Wash (45
Rinse (50
Rinse (55
in accordance with EN 50242, as follows:
Capacity: 12 settings
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
PI:0.49w;Po:0.45w
"
"
Detergent Detergent
Running Running
pre/main pre/main
time(min) time(min)
5/25g
170
1 or 2 pieces
)
5/25g
190
1 or 2 pieces
30g
90
1 piece
)
25g
30
)
)
"
15
Rinse Rinse
Energy Energy Water Water
(Kwh) (Kwh) (L) (L) Aid Aid
1.6 18.5
0.91 11
1.35 12.5
0.75 11
/ /
GB