Technical Data - STERWINS POC-3 Manual De Instrucciones

7. DECLARAŢIE DE CONFORMITATE CE
ADEO Services
FR
135 rue Sadi Carnot
1. INTENDED USE OF PRESSURE SWITCH
ES
59790 Ronchin - France
The product is mainly intended for home supply and irrigation. The mechanical controller orders
the automatic start and stop of the water pump when opening or closing any tap or valve of the
PT
Declarăm faptul că produsul:
installation. Do not use it for others purposes. The product is not intended to be used by children or
ÎNTRERUPĂTOR DE PRESIUNE POC-3
persons with reduced physical, mental or sensory capabilities. Please note that our equipment has
IT
not been designed for use in commercial, trade or industrial applications. respectă cerinţele următoarelor directive ale Consiliului:
EL
Directiva 2014/35/UE privind tensiunea joasă
This product can be used to control on/off for a lot of pumps. The operation is based on pressure
electronice (UE)2015/863 ce amendează Directiva 2011/65/UE
changes in plumbing. When plumbing pressure reaches the pre-set upper limit, the switch will cut
PL
off the electricity and stop the pump. When plumbing pressure reaches the pre-set lower limit,
the switch will connect the electricity and start the pump. In this way, it goes the circulation and
RU
şi este conform cu următoarele norme:
completes the automatic control process.
EN 60730-1:2011
KZ IEC 62321-5:2013
Purpose of control: Pressure sensing
EN 60730-2-6:2016
IEC 62321-6:2015
Construction of control: incorporated control, non-electronic control
UA
IEC 62321-1:2013
IEC 62321-7-1:2015
Pressure medium: water
IEC 62321-2:2013
IEC 62321-7-2:2017 &
RO Action type: type 1.A
IEC 62321-3-1:2013
ISO17075-1:2017
Control pollution degree: 2
IEC 62321-4:2013+A1:2017
IEC 62321-8:2017
EN
Nr. de serie: Vă rugăm consultaţi coperta de pe verso.
Ultimele douã cifre ale anului în care
s-a aplicat marcajul CE: 20
CS 00001
54
Please read the operating instruction carefully and observe the notes given. Use these
operating instructions to familiarise yourself with the product, the proper use and the safety
instructions.
Keep these operating instructions in a safe place for future uses.

2. TECHNICAL DATA

Maximum work pressure: 5Bar
16(8)A
3. INSTALLATION
During installation, the pressure switch should be
mounted to the pump tightly without any water leakage.
Otherwise, the pump will start very often and damage
the motor.
All insulation clips of electric cable should be well to
avoid any cable damage.
4. CABLE CONNECTION
55
FR
1.4Bar
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN