Belt/Brushes - Hoover Dual Power REMANUFACTURED Manual Del Propietário

BELT OR BRUSHROLL:
CAUTION
!
To reduce the risk of injury from moving parts,
unplug cleaner before servicing.
Belt: What to Buy
For Belt Style 29 replacements or to locate a
dealer nearest you, please call 1-800-944-
9200 or visit our website at www.hoover.com
How to Remove
4.6 Flip cleaner on its side to expose bottom of
cleaner.
4.7 To remove belt cover, use Phillips screwdriver
to remove the seven screws. Arrows show loca-
tion of screws.
4.8 Remove belt cover from unit. NOTE: Wheel is
intended to be removed with belt cover.
4.9 Pull both brushrolls towards user to remove
from unit.
Remove belt. Dispose of old belt.
How to Replace
4.10 Slip brushrolls through belt.
NOTE: Place belt on rounded areas of brushrolls
without brushes.
4.11 With belt in place, pull and slide brushrolls
into unit, making sure that the brushrolls end caps
are in the correct orientation.
Place new belt on motor shaft.
4.12 Replace belt cover. Secure by replacing all
screws.
IMPORTANT
Rotate brushrolls manually to make sure belt is
not twisted or pinched.
How to Remove and Replace
4.6
!
4.8
4.10
4.12
10
4.7
4.9
4.11