DURAVIT 791851 Instrucciones De Montaje Y Uso página 8

Important information
Operation
Bluetooth technology
Compatible devices can be connected
wirelessly using Bluetooth technology. The
connection does not require that the devices
are in visual contact. However, the devices
must not be more than 5 metres away from
each other. The connection can be adversely
affected by interference (obstructions, such as
walls or electronic devices).
Risk of fatal electric shock!
DANGER
> Do not take your audio source into the
whirltub and observe the appropriate
protected areas for the use of electrical
equipment.
Switching Bluetooth on/off
Prerequisite: Bluetooth and PIN input-enabled
audio source with a A2DP protocol.
> Switch on the main switch.
Bluetooth mode is activated.
> Activate Bluetooth mode on your audio
source as described in its operating
instructions.
> Search for the "DuravitSound_xxxx"
Bluetooth device and establish a connection
to it. (xxxx stands for the individual system
identification code; you can find this on the
back page of the operating instructions)
> Enter the activation code: "2412".
> Select music and adjust the volume on your
audio source.
8
ZU_M_Sound/15.12.4