PRODUCT CHARACTERISTICS
The chainsaw is only intended for cutting wood. The chainsaw electric drive allows it to be used under a canopy or near buildings.
It can be used for cutting trees, but due to the hazard, it is required that an experienced user performs the cutting operation. Be-
cause a correct, reliable, and safe operation of the device depends on proper use, follow the guidelines below.
Read this entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the device, failure to observe the
safety regulations and recommendations of this manual. Use of the tool for purposes other than those for which it was intended
shall cause the loss of the user's rights to a warranty and statutory warranty.
PRODUCT EQUIPMENT
The chainsaw is supplied complete but requires assembly before fi rst use.
The chainsaw includes:
- chain guide bar
- cutting chain
- guide bar guard
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Chain speed
Guide bar length
Chain scale
Chain spacing
Chain type
Chain guide bar type
Guide link width
IEC protection class
Oil tank capacity
Weight (without the guide bar and chain)
Noise level
- L
(pressure)
pA
- L
(power)
wA
Vibration — main handle/additional handle
Protection rating
GENERAL WARNINGS FOR THE SAFETY OF MACHINES
Warning! Read all safety warnings, illustrations and specifi cations provided with this machine. Failure to do so may result
in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "machine" used in warnings applies to all machines driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with machines in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power machines generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed machines. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
O R I G I N A L
14
GB
Unit
[V~]
[Hz]
[W]
[m/s]
[mm / '']
[mm]
[mm]
[mm / '']
[ml]
[kg]
[dB] (A)
[dB] (A)
[m/s
]
2
I N S T R U C T I O N S
Value
79675
230-240
50
1600
13
355 / 14
8.255
19
91PJ052X Oregon
518304, Oregon
1.47/0.058
II
110
4.14
90.2 ± 3.0
103.2 ± 3.0
8.393 ± 1.5 / 6.002 ± 1.5
IPX0