Philips Supervapor GC6048 Manual De Instrucciones página 9

All manuals and user guides at all-guides.com
- 2 Wool
- 3 Cotton, linen
- When you do not know what kind of fabric the article is made of,
try to iron a spot which will be invisible when you wear it.
- Silk, woollen and synthetic materials: iron the reverse side of the
fabric to prevent shiny patches.
- Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
Label with ironing
instructions
B
C
D
Z
4 Cold start: the water in the steam tank and the soleplate will
now be heated up.The soleplate takes approximately 2 minutes
to heat up, the water in the steam tank takes approximately
8 minutes to heat up.
5 Quick reheat: if you refill the steam tank during the ironing
process, the water in the steam tank will take approximately
6 minutes to heat up.
C
Push the 'Iron on/off' ≥ switch (F) to set it to position I.The
6
pilot light in the switch as well as the 'Iron heating up' pilot
light (K) will go on.
7 After a few minutes the 'Iron heating up' pilot light (K) will go
out to indicate that the soleplate has reached the set
temperature.
Tips
During ironing the pilot light will go on from time to time to
indicate that the soleplate is being heated up to the required
temperature again.You can simply continue ironing when this
happens.
If the fabric consists of various kinds of fibres, always select the
temperature required by the most delicate fibre, i.e. the lowest
temperature. For example: if an article consists of 60% polyester
and 40% cotton, it should be ironed at the temperature indicated
for polyester (1) and without steam.
Type of fabric
Synthetic fabrics e.g. acetate,
acrylic, viscose, polyamide,
polyester Silk
Wool
Cotton Linen
Please note: Z on the table
means that the article
cannot be ironed.
ENGLISH
9
Temperature
control
1
2
3