Irregularity Measures; Failure Tips - Active TIGERCUT 25 Manual De Usuario

Irregularity Measures

1. In the event the pruning shear is not able to cut through an object, release trigger
immediately, the moving blade will return to its open position automatically.
2. In the event the pruning shear is cutting through a particularly hard branch, release
the trigger immediately, the moving blade will return to its open position
automatically.
3. In the event the battery is not charging properly, please check if the charger is the
one provided with the package during purchase. Next ensure that the supplied
voltage to the charger has the same rating as the speci cations on the charger.
In the event of electrical or mechanical malfunction, power OFF immediately.
4.
5. Operating without following instructions may result in battery uid leakage. Do not
touch the leaked battery uid. In the event of accidental contact with battery uid,
clean with clear water immediately. If the battery uid comes in contact with the
eyes, wash with clear water and ask for medical assistance. Fluid from leaked battery
may cause irritations or burns.

Failure Tips

Buzzer Sound
Frequency Times
1
2
3
4
5
Failure
Battery capacity failure
Communication failure
Blade failure
Motor phase loss
Motor phase line
short-circuit
Solution Method
Check if battery capacity is low
Check correct wiring
Oil on blades
Send to local dealer
for maintenance
Check if cable or head of
connector has caused short-circuit
25