Joie i-Gemm 3 Manual De Instrucciones página 7

!
Check that the safety belt does not move by pulling and pushing
hard on base. If belt loosens or lengthens, repeat procedure.
5. The installed base is shown as
!
Please ensure that there is no gap between the seat and the bottom
of the base.
!
The safety belt must go under the lock-off, not over the lock-off.
-1
!
The safety belt must be locked into the buckle.
!
The load leg must be installed correctly with green indicator.
6. Push the infant carrier module down into the base.
7. If the enhanced child restraint is secure, the enhanced child restraint
indicator shows green.
15
!
Pull up on the infant carrier module to be sure it is securely latched
into the base.
8. To release the infant carrier module, pull the infant carrier up
while squeezing the infant carrier release button.
7
.
13
-2
13
14
-1
16
13
-3
13
-2
16
8