Trevi SB 8316 TV Manual Para El Uso Y La Conexión página 11

ENGLISH
AUX-IN INPUT
1. Use a 3.5mm Stereo jack cable to connect the AUX input (7) on the back of the sound bar to the headphone / audio output of
the TV or other source device;
2. Turn on the appliance and press the M button (12) on the unit or the MODE key (26) on the remote control repeatedly until
"AUX" appears on the display; the signal present on the AUX input will be automatically reproduced;
3. For correct sound reproduction, refer to the VOLUME ADJUSTMENT, MUTE FUNCTION and PRE EQUALIZATIONS chapter.
USB INPUT
1. IInsert a USB memory into the input (6);
2. Turn on the device, the contents of the USB will be automatically played; if this is not the case, press the M button (12) on the
unit or the MODE key (26) on the remote control several times until "USB" appears on the display;
3. Press the button
9 :
4. To use (16) and
OPTICAL INPUT
1. Use a digital optical cable (not included) to connect the OPTICAL input (5) to the digital optical output of the TV or other source
device;
2. Press M button (12) on the unit or the MODE button (26) on the remote control repeatedly until the word "OPT" appears on the
display;
Note:
• Before connecting the optical cable, be sure to remove the plug protection cover if your cable is equipped with it.
• Some TVs or devices is necessary to enable the digital optical output.
• PCM digital audio must be set on the source device for playback from this input.
BLUETOOTH OPERATION
1. Turn on the appliance and press the M button (12) on the unit several times until the message "BT" appears on the display, or
the key (19) on the remote control;
2. The system will automatically enter search mode, if not, press the button
3. Activate the Bluetooth functionality on the external device to be paired;
4. AStart searching for devices. At the end select the device "SB 8316TV";
5. Enter the password "0000" if requested;
6. Press button (24) of remote control to start playback, use
previous or next track;
7. Press the button (19) for a few seconds to interrupt the active connection and pair a new device.
TROUBLESHOOTING
If the Sound Bar does not work properly, check this short list before taking it to a TREVI authorised service centre.
In any case, do not try to repair the device, this will void the warranty. Only TREVI authorised service centres are authorised to
perform operations on this product.
No Sound
 Check that the MUTE function is not activated.
 Check that the correct input has been selected.
 Check and adjust the volume of the Sound Bar and the TV (or the device connected).
The Sound Bar does not turn on or turns off automatically
 Check that the power cable is correctly inserted.
 If the Sound Bar does not receive any signal for some time it automatically turns to standby mode.
(24) on the remote control to temporarily stop playback. Press it again to resume playback;
(25) buttons on the remote control to skip to the previous or next track.
(19) for a few seconds;
9 :
(16) and (25) buttons on remote control to skip to the
11
SB 8316 TV