EAS ELECTRIC EMR373AB1 Manual De Instrucciones página 43

!
The voltage and frequency of mains power should be
the same as the values specified on the label behind
your appliance. If mains power is far below or above
the specified values, have the desired voltage by
using a voltage regulator. You can get help from a
qualified electrician. The fuse of the mains socket
should be maximum 16A.
ATTENTION!
Ensure that the floor and walls of the location of your
cooler shall not be damaged by water against the risk of
flooding of drainage water in very humid environments.
On installations performed by the EAS Electric authorized
service, customer shall be informed and advised about the
proper installation location, however final decision on the
installation location shall be made by the customer.
Authorized Service specify the process mentioned above
on the relevant installation service form. Customer shall be
solely responsible for any damages that may occur due to
the installation location decided as per the final decision of
the customer.
14 V.1