Drain Pipe Installation; Power Connection - Nitecore AC10 Manual De Instrucciones

Pic 3
2. When the Cooling Air Outlet is placed in
the tent, place the Condenser Air Inlet
and the Hot Air Outlet outside as Pic 3
illustrated.

Drain Pipe Installation:

Connect the Drain Pipe with the Drain and place the
other end outside to avoid bending and clogging.
Note: Place the product in a flat and ventilated area
and make sure there is no obstruction around it at
least 50cm (20"). Keep the Drain Pipe in a straight
line and DO NOT extend the hose or exchange
different hoses, or the product may be damaged.

Power Connection

Use the Power Adapter to connect an external power supply (e.g. an AC power supply or
power station) to the Power Input. The real-time display will flash to inform the user after the
connection is completed.
Operating Instructions
On / Off
On: When the product is off, short press the Power Button to turn it on.
Off: When the product is on, long press the Power Button for 3 seconds to turn it off.
Pic 4
3. When the product is placed outside the
tent, the cooling air should be blown into
that as Pic 4 shown.
Screw the Cooling Air Connection to the
front end of the product and connect
two hoses with the threaded end of the
Cooling Air Hose Connection. Then the
cooling air should be blown into the tent.
3