ONFORU DT5UV Guia De Instalacion página 6

For the pack of 3 sets
1. Connect the DC female side of the LED strip light with the
DC Line.
2. Connect the Line with the power adapter.
3. Plug the power adapter into the socket. Then the LED strip
light work.
Tips
If the light strip is not fixed with tape, you can reinforce it with clips
in the package.
If the strip can't be turned on after installation, please check whether
the joint is connected correctly.
Operation / Maintenance
Prior to cleaning the light, make sure it has been disconnected from the
power supply.
The unit is not suitable for burglar alarm systems as it is not tamperproof
in the manner prescribed for such systems.
Never use any chemicals or corrosive substances for cleaning.
This light should be used in condition with sound heat dissipation. The
working temperature of it should be less than 40°C. Overhigh working
temperature will cause serious lumen depression and affect lifespan
of the light.
Disposal
Electrical and electronic equipment, accessories and packaging must
be recycled in an environmentally compatible manner.
Do not dispose of electrical and electronic
equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste Electrical and
Electronic equipment and its implementation in national law,
electrical and electronic equipment no longer suitable for use must
be collected separately and recycled in an environmentally
compatible manner.
6
English