Initial Settings - KSIX URBAN 3 Manual Del Usuario

Charge
To charge the smartwatch, align its contact base (on the back of the smartwatch) with the
charging base. Please, notice that the magnetic charger includes two little metallic pieces
that must be in contact with the two metal dots on the contact base.
Turning on and o
To turn on the smartwatch, long press the button in the upper right corner. A bar will
appear on the screen and it will gradually turn yellow. Please, long press until the bar is fully
yellow and disappears from the screen.
To turn o the smartwatch, go back to the home screen and long press the bottom in the
upper right corner. The smartwatch will vibrate and a confirmation message will appear on
screen. If you do not want to turn o the device, select the option in grey and you will be
redirected to home screen. If you want to turn o the device, select the option in red and
the smartwatch will turn o straight away.
You can also turn o the smartwatch by opening Settings and then Power o .

Initial settings

1. Turn on your device's Bluetooth settings and activate Bluetooth.
2. Download the smartwatch's APP: SMART-TIME PRO
3. Follow the instructions in the APP and create an account.
Note: If your smartphone cannot pair the smartwatch, enter Bluetooth settings on your
mobile phone and check if the signal of Urban 3 is available. If it appears on the list, it
means the Bluetooth signal works properly. Please, check if the smartwatch has been
paired with other phones before. In case it is paired with any other f your mobile cannot
pair the watch, click Settings – Bluetooth in your mobile phone and check whether there is
signal of F3 Pro. If yes, it means there is no problem with the Bluetooth signal. Please,
check if the watch is paired with other phones. Please unbind it. IOs device users should
click Setting – Bluetooth – ignore this device and then pair it.
Paring the smartwatch with iOs devices
1. Enable the Bluetooth function on your smartwatch. A little blue icon should appear on
screen.
2. Open your smartphone Bluetooth settings and search BT.3 on the list. Select it, and the
icon on your smartwatch will turn blue and orange.
3. Open the APP and select "Device". Then, select "Add new device".
4. A device called F3 Pro should appear on your list. Select it.
5. A confirmation message will appear on your smartwatch screen to synchronize it with
your mobile phone. Please, allow the synchronization.
6. A synchronization message might appear on the screen of your device. Please, enable
synchronization.
7. If necessary, accept any notification permit that the smartwatch might require.
Once the smartwatch has been inserted in the charging base,
it will vibrate and a charging indicator will appear in the
watch screen within 5 seconds and the smartwatch will
vibrate.
It takes 2 hours to charge the smartwatch completely. Once
the charge has been completed, the battery icon will look
fully colored.
Note: Please, clean the contact base with a dry cloth before
charging the smartphone, as any rest of sweat might damage
the metal dots on the contact base.
the smartwatch
SMART-TIME PRO ESCANEA EL CÓDIGO QR