Levelling The Washing Machine - Teka WMK 81050 DSS Manual De Instrucciones

INSTALLATION
Remove transport bolts
！
Warning!
• You must remove the transport bolts from the backside before using the product.
Loosen the 4 transport
bolts with a spanner.

Levelling the washing machine

！
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect the water supply hose
！
Warning!
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Remove the bolts
including the rubber parts
and keep them for future
use.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
11
Close the holes using the
cover caps.