Technaxx TX-22+ Manual Del Usuario página 7

Recording in Phono mode (Vinyl)
Firstly insert memory device (USB drive or SD card). When turntable is
working, press the REC key on the top control board of the unit, (between step
5 and 7 from "Playing a record") now recording will begin and USB or SD
symbol is flashing. To finish the work just need to press the STOP key.
How to replace a needle
Removing the needle from the
cartridge:
Place a screwdriver at the tip of the
needle heads
downwards in the direction shown in
sketch "A". Remove the needle head
shell by pulling it forwards and pushing
downwards.
hell and push
Inserting the needle:
1. Guide Pins (inside)
Hold the tip of the needle head shell
and insert it by pressing in the direction
illustrated by "B". Push the needle
head shell upwards in the direction
illustrated by "C" until the needle locks
into the tip position.
7