Technaxx TX-22+ Manual Del Usuario página 9

Record a cassette
1. Set the function button to TAPE/AUX mode and then insert a memory
device (USB drive or SD card).
2. Press the record REC button, it will take 3 - 4 second to read the memory
device, then the USB or SD icon will be flashing on the LCD display.
3. Music will be recorded to the last inserted flash drive (USB or SD).
4. The system will start the recording mode after a few seconds. Insert your
cassette into the playback slot. During encoding, the USB or SD icon will be
flashing on the display.
5. To finish the recording, press the stop button. The display will show "END"
and return to TAPE/AUX mode.
NOTE:
 The recording speed is 1:1. Recording will take as long as playing the
cassette.
 The recording format is preset at MP3 bit rate 128Kbps.
AUX-IN Mode
Reproduction via AUX-IN
1. Turn the volume knob (14) to turn the device on.
2. Use the function selector (4) to select TAPE/AUX mode, then connect the
external audio device (such as a CD player, Smartphone, etc.) to the AUX-IN
socket at the front of the device. The audio signal from the external audio
device will now be played through the system.
3. If an external audio device is connected to the AUX IN socket, playing of the
AUX–IN mode takes priority over cassette playback.
9