Second-Hand S-Bottle Warmer; Questions; Technical Problems - Difrax S Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
Child safety features: The S-bottle warmer will only be activated
when the operating button
I
3 seconds. This ensures that a child cannot switch on the S-bottle
warmer. Should a child inadvertently press and hold the button,
the food in the bottle will warm up to a safe temperature of 37 °C *.
If there is no heating element
C
device will not be activated and will therefore not warm up

Second-hand S-bottle warmer

Difrax advises against the purchasing and use of a second-hand
S-bottle warmer. It is not always possible to tell whether the
warmer is in a good state of repair and safe to operate

Questions

If you have any comments or queries about using the Difrax
S-bottle warmer, contact your nearest sales outlet or the Difrax
customer service team. you can also visit the Frequently Asked
Questions section on www.Difrax.com for information on the
S-bottle warmer
* +/- 2 °C
is pressed and held for at least
on the base station
, the
G
16

Technical problems

The S-bottle warmer is not warming up
Check that the device is securely plugged in
Check that the bottle with heating element is firmly in place on
the base station
G
Check the parts for signs of damage and replace if necessary
after contacting the Difrax customer service
The S-bottle warmer does not switch on when I press the
operating button
I
That is correct. you must press and hold the operating button at
least 3 seconds to activate it. This is a child safety feature
The operating button does not light up
you should see a flashing red light when the S-bottle warmer is
switched on. If this does not happen, either the (breast)milk or
the water in the bottle has reached the correct temperature
The S-bottle warmer will not heat up the food if the food
temperature is below 0 °C (food from the refrigerator has an
average temperature of 6 °C) 
The bottle base
or
must be placed firmly on the base
D
E
station
(you should notice a little resistance when placing
G
towards the end)
If the bottle is firmly in place on the base station and you are
using (breast)milk or water that is around or above 6 °C warm
and the light has still not gone out, there is a technical problem.
In that case, contact the Difrax customer service
17

Publicidad

Tabla de contenido
loading

Productos relacionados para Difrax S

Tabla de contenido