Installation Tips - INVENTOR FRS-10L Manual De Usuario

Installation tips

3) Place the unit away from
clothes dryer, heater or
radiator
4) Ensure the filter is clean.
5) Place unit in vertical
operating position and
allow 2 hours before
initial use in order to avoid
malfunctions.
EN
1) Do not block or restrict the
airflow around the unit. Make
sure the air inlet exhaust grills
are not obstructed. Allow 20cm
of clearance around the unit and
40cm above.
2) Place the unit in an area where
the temperature levels will not
fall bellow 5ºC (41ºF) There is a
possibility the coils will collect
frost at temperatures that are
under 5ºC (41ºF), which may result
in low performance.
(Working conditions: 5°C-32°C,
30%RH–80%RH).
6) Prior to initial use, please remove the water
bucket and check if any packaging parts (for
example: the draining hose) are included.
Remove and re-position the water bucket
firmly into place.
7) Do not connect the dehumidifier to a
multiple socket outlet, which is also being used
for other electrical appliances.
15