Transport; Storage; Maintenance And Care; Safety Inspection/ Maintenance Contract - Kärcher HD 10/25-4 S Manual De Instrucciones

Ocultar thumbs Ver también para HD 10/25-4 S:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12

Transport

Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Pull the device behind you at the handle
for transporting it over longer distances.
 Empty the detergent tank before trans-
porting in horizontal position.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Storage

Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note
Please dispose off used oil only in the col-
lection points provided for them. Please
hand over old oil, if any, only at such plac-
es. Polluting the environment with used oil
is a punishable offence.
Safety inspection/ maintenance
contract
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Before each use
 Check connection cable for damages
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer
service person/ electrician.
8
All manuals and user guides at all-guides.com
 Check the high pressure hose for dam-
 Check appliance (pump) for leaks.
 Check oil level Please contact Custom-
 Clean the fine filter.
 Clean filter at the detergent suck hose.
 Oil change.
Oil change
Note
See "Technical Details" for details of oil
quantity and type.
 Unscrew the fastening screws of the
 Turn out the oil drain screw at the front
 Drain the oil in a collection basin.
 Turn out the oil drain screw.
 Fill in new oil slowly; air bubbles should
 Attach the lid of the oil container.
 Fasten the device hood.
 Empty and clean the detergent tank.
– 6
EN
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure hose.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Weekly
er Service immediately if the oil is milky
(water in oil).
Unpressurize the appliance.
Unscrew the fastening screws of the
device hood; remove the device hood.
Unscrew lid with filter.
Clean the filter with clean water or com-
pressed air.
Reinstall in reverse sequence.
monthly or after 500 operating
hours
device hood; remove the device hood.
on the motor casing.
go out.
If required
Pull out the locking cap for the deter-
gent tank along with the suction hose.
Lay the device on the reverse.
Empty and clean the detergent tank.

Publicidad

Tabla de contenido
loading

Tabla de contenido