Product Overview - AKASO D2000 Manual De Instrucciones

English
Introduction
Thank you for choosing AKASO Dash Cam. This FHD 1080P Dash Cam is designed for
recording real time video and audio while driving. To better use it, please read this manual
carefully.
Features
• 170 degree wide angle
• Full HD: 1920*1080@30fps; HD: 1280*720@60fps
• H.264 video compression format
• Automatic file lock triggered by G-sensor
• Motion detection
• WDR (Wide Dynamic Range)
• 3 inches HD LCD display
• Built-in Lithium Polymer battery
• Support microSD/TF card up to 32GB
What's in the box?
• 1 x Dash Cam
• 1 x Car Charger
• 1 x Suction Cup
• 1x 3M Adhesive Mount
• 1x Hardwire Kit
• 1 x USB Cable
• 1 x User Manual

Product Overview

12
5 6 7
1
2
3
4
13
1. TF Card Slot 2. UP 3. Menu 4. Down
5. HD Interface 6. Stand Base 7. DC Power/USB Interface
8. Video/OK 9. Mode 10. Emergency Save
11. Power 12. Lens 13. Display
Buttons:
Up Down MENU – Press to enter and exit Settings Mode
All manuals and user guides at all-guides.com
8
9
OK
10
M
11
14. MIC 15. Reset Hole
1
• Press to navigate UP through options in Settings Mode
OK
• Recording Mode Hot Key: Record(Press to start / stop recording)
M
MODE Select – Press to toggle between Recording / Photo / Playback modes
Current video file locked
POWER – Press and hold to turn the device on or off
Product Installment
• Insert microSD/TF card to card slot of dash cam
• Select a spot on windshield to locate the suction cup near the rearview mirror
• Attach the cam to the bracket
• Connect the DC power/USB interface of the cam to the car cigarette lighter by the power
cable
• Adjust the cam to the position with best shooting range, then fix the position of bracket
• Once engine starts, the cam will start to work automatically
Attention:
• Please use Class 10 microSD/TF card or above
• Insert the microSD/TF card into the slot in the right direction
• To remove the microSD/TF card, please gently press the card
Use your DashCam
12
Once engine starts, the cam will start to record video automatically
1415
• Turn On/Off
Short press Power button to turn on; Long press Power button to turn off
• Video shooting settings
- Please press OK first before entering the video shooting settings
- Press Menu button once to start video shooting mode settings. Press Up and Down
buttons to select each setting, and press OK to confirm.
- Resolution: 1920*1080; 1280*720; 848*480; 640*480; (Default: 1920*1080)
- Loop recording: off/1/3/5 minutes (Default: 3 minutes)
- WDR: off/on (Default: on)
- Exposure:+2;+5/3;+4/3;+1;+2/3;+1/3;+0;-1/3;-2/3;-1;-4/3;-5/3;-2; (Default: +0)
- Motion Detection: off/on (Default: off)
2