Product Overview - AKASO DL2 Manual De Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

English

PREAUTION

AKASO Dash Cam is not intended to be modified, or calibrated while operating a

vehicle. AKASO is not responsible for any damages resulting from the user's misuse

of the camera.

Use only manufacturer-approved chargers, accessories, and supplies.

AKASO cannot be responsible for the user's safety when using accessories or supplies

that are not approved by AKASO.

Do not store your device in excessively hot, cold, damp or dry locations.

Doing so may cause the screen to malfunction, result in damage to the device, or cause

the battery to explode. Your device is recommended for use within a temperature range

of -4º to 131º F (-10º to 55º C), and a humidity range of 10% to 80%.

If your device becomes overheated, allow it to cool down before use.

Prolonged exposure of skin to an overheated device may cause low-temperature burn

symptoms, such as red spots or areas of darker pigmentation.

Do not touch the car charger with wet hands or disconnect the charger by pulling the

cord. Doing so may result in electrocution.

Do not use damaged power cords or plugs, or loose electrical sockets.

Faulty connections can cause electric shock or fire.

Do not touch your device with wet hands.

Doing so may cause electric shock.

Do not remove the SD card from the product during data recording, which may

cause an Error.

Always keep the camera lens clean, and ensure that the lens is not blocked by any

object or placed near any reflective material.

If the car's windshield is tinted with a dark coating, recording quality may be affected.

USE SUGGESTIONS

Please use10 high-speed MicroSD memory card.

Please buy genuine MicroSD memory card to use to avoid compatible issue.

For the first time, please format your MicroSD memory card.

Note:

a. MicroSD card maximum support 32G, FAT32 format, allocation unit size ≥ 32kb;

b. Make sure insert MicroSD card in the local MicroSD card slot. When you hear "click",

the memory card is inserted correctly.