PARTS
1.
Control panel
2.
Freezer compartment
3.
LED lighting
4.
Shelves
5.
Vegetable container
6.
Levelling feet
7.
Door shelves
8.
Handle
INSTALLATION
·
Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Dry the appliance off well.
·
Let air circulate freely around the cabinet.
·
Make sure there is sufficient space to open the door.
·
This cooling unit is not intended for use as a built-in appliance.
·
Select a place with a strong, level floor.
·
Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
·
Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your refrigerator.
48
DO91122
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE