Loading A Lighting Project; Reading And Viewing The Lighting Mode - EHEIM LEDcontrol 4200120 Manual De Instrucciones

English

7.4 Loading a lighting project

7.5 Reading and viewing the lighting mode

1. Start the program EHEIM V2.0.
2. Click on in order to select a lighting project.
3. Select the Modes folder.
4. Select a project file.
The folders freshwater and seawater are not project files! In
order to view or edit the lighting modes contained within, you must
load a new lighting project or open an existing one.
5. Open the project file.
The file name of the project file is displayed behind the software
designation EHEIM V2.0.
1. Start the program EHEIM V2.0.
2. Click on to select an existing lighting project or click on
a new one.
‧ In order to read, view or program the lighting modes, a lighting
project must always be created!
‧ A lighting project can include several lighting modes, depending
on the requirement.
3. Click on in order to select a lighting mode.
4. Select the Modesfolder.
5. Select an EHEIM lighting mode from the folders freshwater or seawater,
see chapter 9. EHEIM lighting modes, page 33. Or select a previ-
ously individually created lighting mode, see chapter 7.6 Programming
individual lighting mode, page 30.
6. Open the lighting mode.
Repeat the procedure if you are reading several lighting modes,
and, for example, wish to compare them in a quick run-through.
28
to create