Connecting The Gas Cylinder; Other Connections - Sunwood Marino Manual De Instrucciones

1.3 CONNECTING THE GAS CYLINDER

This appliance requires an EN16436 certified flexible hose (from 40 to 50cm) and an
EN16129 certified pressure regulator (of 30/37mbar).
Consult the instructions of the pressure regulator to connect the gas cylinder.
THREADED CONNECTION

OTHER CONNECTIONS:

Use the supplied adapter.
WARNING:
away from candles, cigarettes, and other ignition sources.
WARNING:
rectly fitted and undamaged. If this is not the case it shall be exchanged
for a new regulator seal and the appliance shall not be used.
WARNING:
time the gas cylinder is changed. If the hose shows signs of cracking,
splitting or other deterioration it shall be exchanged for a new hose of the
same length and of the equivalent quality.
WARNING:
without regulator.
1/4" LH
Only change the gas cylinder in an amply ventilated area and
Always check that the regulator seal (rubber O-ring) is cor-
Check the flexible hose at least once per month and each
Do not connect the gas cylinder directly to the appliance
5