Automobile; Configuring Your Navigator Iv; Acquiring Satellites; Using The Menu Page - BMW Motorrad Navigator IV Manual Del Usuario

Configuring Your Navigator
IV
Your unit should turn on automatically if it
is plugged in and your vehicle is running. To
manually turn on your Navigator IV, press
the Power key. Follow the on-screen
instructions.

Acquiring Satellites

1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the
Navigator IV.
Acquiring satellite signals may take a few
minutes. The bars indicate GPS
satellite strength. When one bar is green,
the Navigator IV has acquired satellite
signals. Now you can select a destination and
navigate to it.
BMW Motorrad Navigator IV Owner's Manual

Using the Menu Page

➊ ➋ ➌
➍
➏ ➐
➑ ➒ ➓
➊
GPS satellite strength.
➋ Bluetooth technology status.
®
➌ Touch to select motorcycle, scooter,
automobile, or pedestrian mode.
➍ Battery status.
➎ Current time. Touch to change settings.
➏
Touch to find a destination.
➐
Touch to view the map.
➑ Touch to make a call when connected to
a compatible mobile phone.
➒
Touch to adjust the volume.
➓ Touch to use the tools such as settings,
Where Am I?, Help, and routes.
Selecting a Usage Mode
➎
Motorcycle
Scooter
Pedestrian
Your Navigator IV offers several usage
modes for different modes of transportation.
Routing and navigation are calculated
differently based on your usage mode.
For example, one-way streets are treated
differently in walking mode than they are in
driving mode.
When you place your Navigator IV in a
mount that does not correspond to its current
usage mode, the Navigator IV will ask you
whether you want to change usage modes.
Changing your Usage Mode
1. Touch the usage mode icon.
2. Select a mode, and touch OK.
3. Touch Yes, and follow the on-screen
instructions to configure your settings.
Getting Started
E
N

Automobile