Descargar Imprimir esta página

Description Of Accessories - BIEMMEDUE Ursa Major Manual De Uso Y Mantenimiento

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6-SIGNAL/ALARM INDICATORS
REFERENCE
SIGNAL/ALARM
1
maximum vacuuming power
indicator
2
medium vacuuming power
indicator
3
minimum vacuuming power
indicator
4
steam ready indicator
5
maximum steam intensity
indicator
6
medium steam intensity
indicator
7
minimum steam intensity
indicator
8
no water in tank alarm
9
no detergent in tank alarm
10
Detergent activation indicator
WARNING: When the dirt in the vacuum bin
reaches the maximum level allowed, no alarm
is displayed, but a float switch automatically
closes
the
vacuum
LIGHT
COLOUR
blue
blue
blue
green
blue
blue
blue
red
red
blue
opening
inhibiting
EN
vacuuming. There will be an abrupt decrease
in the suction power and louder motor noise.
In this situation the machine must be turned off, unplugged,
vacuum
hose
disconnected,
emptied/cleaned.
7 – DESCRIPTION OF ACCESSORIES
HOSE (1.a): consists of a handle, a sheath and a plug,
used to connect the accessory to the machine.
All of the accessories supplied with the machine can be
fitted on it by simply pushing the accessory on the handle
until the coupling system (3), located in the lower part,
clicks.
The delivery trigger is located in the lower part of the
handle (1), while the keypad (4) for activating and
regulating the "steam" and "vacuum" functions is located
in the upper part. There is also a trigger locking device (2)
to prevent accidental delivery.
EXTENSION TUBES (2.a): they are attached to the
handle and have the functions to extend the user's action
range. They can also be used for cleaning floors.
STEAM/VACUUM BRUSH (3.a): in the 300mm or 400mm
version it is used for cleaning many surfaces. Its vacuum
action is enhanced thanks to the use of specific frames
(7.a).
TRANSPARENT NOZZLE (9.a): in the 120mm or 220mm
version it is used for cleaning many surfaces, above all
carpet and rugs but also car upholstery or armchairs and
sofas. The dirt that is vacuumed and eliminated can be
clearly seen through its transparent enclosure.
PROFESSIONAL NOZZLE (4.a): increases the force of
the steam flow. Many accessories can be fitted on it,
including the horizontal nozzle (5.a), the vertical nozzle
(8.a), the grout cleaner nozzle (12.a) and the abrasive
brushes (1.b) which should be screwed on the end part of
the accessory.
HORIZONTAL NOZZLE (5.a): designed for vacuuming
small surfaces.
WINDOW CLEANER WITH VACUUM (6.a): designed to
polish particularly smooth surfaces, like windows.
BRUSH FRAMES (7.a): these are fit on the brush body by
moving the side sliders. The following frames are
available:
-
Double bristle frame: used to clean the most delicate
surfaces
-
Double rubber frame: used to clean all surfaces
Double rigid frame: used to clean rugs and carpet
-
GROUT CLEANER NOZZLE (12.a): specific accessory for
cleaning grout. It is fitted on the professional nozzle (4.a).
VERTICAL NOZZLE (9.a): suitable for vacuuming in hard to
reach areas.
STEAM/VACUUM BRUSH (10.a): thanks to the soft bristles
and the combined steam and vacuum action, this is
particularly used in car-washes and for cleaning car
upholstery.
STEAM/VACUUM NOZZLE (11.a): with its metallic nozzle it
increases the steam flow rate capacity. This characteristic
is combined with the vacuum action.
ABRASIVE BRUSHES (1.b): with their bristles they permit
the best cleaning by combining the mechanical force of the
bristles with the force of the steam
top
unhooked
and
bin

Publicidad

loading