Samsung VS20A95 Serie Manual Del Usuario página 31

Problem
Vacuum cleaner stops
operation during
cleaning.
Suction force decreases
suddenly and the
vacuum cleaner makes
a vibrating sound.
Cleaning is finished but
small dust particles
come out of the
accessories.
• This Vacuum cleaner is approved the following.
- The Low Voltage Directive 2014/35/EU
- The EMC Directive 2014/30/EU
• As this product has the overheating prevention device of the motor,
product will stop operation temporarily for the following conditions. After
correcting the cause of the problem, turn the product on again. (This case
may differ depending on the ambient temperature.)
- When the vacuum cleaner operates with a full dustbin.
- When the vacuum cleaner operates with a brush clogged.
- When the Extension Crevice Tool is used for long hours.
• Check whether the brush, the dustbin or the Telescopic Pipe is clogged
with foreign matter and remove it.
• Check whether the dustbin is fully filled with dust. If it is, empty the bin.
• Check whether the filter is dirty. If it is, clean the filter.
• After cleaning, operate the vacuum cleaner for 10 seconds or more to suck
the small dust particles.
Solutions
English 31