Troubleshooting - Sunset Healthcare Sol Manual De Instrucciones

Weekly
• Hand wash the headgear and all components in warm and soapy water. Use unscented soap.
Rinse the components well and allow them to air dry out of direct sunlight, which may age or
damage the mask.
• If any visible deterioration of a mask component is apparent (cracking, tears,v etc), the mask
component should be discarded and replaced.

Troubleshooting

Problem
Mask is too noisy
Mask leaks around
the face
Mask is uncomfortable
Mask is difficult to
breathe through
Possible cause
Vents are blocked or
partially blocked. Mask is
assembled incorrectly.
Mask may have been
fitted incorrectly.
Mask may have been
fitted incorrectly.
Mask cushion may be dirty.
Solution
Clean vents according to
Instructions in "Cleaning
the Mask at Home".
Reassemble mask.
Carefully follow instructions
in "Fitting".
Carefully follow instructions
in "Fitting".
Clean vents according to
Instructions in "Cleaning the
Mask at Home".