Continuous Drainage - ProBreeze PB-15 Manual De Instrucciones

CONTINUOUS DRAINAGE

• Water can be automatically emptied into a floor drain or sink by attaching the unit to the
water hose (included).
• To do this, remove the plastic cover on the back of the unit. Caution: a small amount of
water may accumulate in the back drain outlet so have a small receptacle or dry cloth
ready to ensure this does not spill onto the floor.
• Attach the continuous hose cover and the drain hose to the back of the unit.
• Direct the hose to the drain; ensuring that there are no kinks and that the continuous
hose outlet is higher than the drain.
• Turn the unit on and press the "cont" button on the control panel.
• Note: when the continuous drainage feature is not being used, remove the hose
from the unit, dry the outlet and replace the plastic cap.
Remove the plastic
cover. Be careful of
water spilling.
9 | English
Female threaded end
Continuous
drainage hose