Astralpool SENEXT XP Serie Manual De Instalación Y Mantenimiento página 14

DESCRIPTION OF THE COMPONENT
Capacitor
Bearings
Mechanical seal
O-rings and other sealing components
The opening and closing of the pump for the replacement of any of the inner spare parts does not
(1)
guarantee the subsequent sealing. For this reason, it is recommended that the O-rings and sealing
components are replaced whenever the mechanical seal and / or bearings are changed.
The estimated working life of the above parts has been established according to normal product use
and installation conditions.
Follow the instructions in the installation manual to maintain the working life of the pump.
O-RING
STRAINER
BASKET
6. TROUBLESHOOTING
• If a problem arises, before contacting your dealer, make the following simple checks as
described in the tables below.
• If the problem persists, contact your dealer.
• Work that should only be carried out by a qualified service engineer.
14
TIME BETWEEN REPLACEMENTS
(1)
STRAINER LID
GASKET HOUSING MUST BE CLEANED
FIGURE 6
Installation and general maintenance manual
10,000 h
10,000 h
10,000 h
10,000 h
- POOL PUMPS