Control Panel - ProBreeze PB-H18 Manual De Instrucciones

SPECIFICATION
― ―
• Model: PB-H18
• Voltage: 220-240V~
• Frequency: 50Hz
• Power: 1800W
• Product Dimensions: 175x132x240 MM
• Net Weight: 1.63kg
PARTS
― ―
1. Handle
2. Temperature control dial
3. Power light
4. Power selection dial
5. Safety grill
6. Tip-over switch

CONTROL PANEL

― ―
1. Fan Only mode
2. Low Power
3. High Power
4. Low Swing
5. High Swing
6. OFF
7. Temperature Control Dial
8. Power Selection Dial
9. Power Light
3 | English
1
2
3
4
5
6
6 1
2
3
MAX 4
MIN
5
8
7 9
OPERATING INSTRUCTIONS
― ―
Switching Your Heater On and Setting the
Temperature:
1. Insert the plug into the power socket.
2. Turn the power dial to the desired
setting:
• FAN ONLY MODE
• LOW POWER – Low heat (1000W)
• HIGH POWER – High heat (1800W)
• LOW SWING – Low heat oscillation
(1000W)
• HIGH SWING – High heat oscillation
(1800W)
3. Turn the temperature control dial until
you hear a click – this will turn the unit
on. Continue turning the dial to your
desired temperature. The temperature
control dial acts as a thermostat. Once
the room has reached the desired
temperature the unit will switch off.
Switching Off:
1. Turn the power dial to the OFF position.
2. Turn the temperature control dial
anticlockwise to the lowest setting.
3. Remove the power plug and store the
heater after the unit has cooled down.
Your Heater's Safety Guards:
• Your heater will automatically turn off
when it is not upright, due to the tip-over
switch on the bottom of the appliance.
This is to prevent damage to your home
and your heater will turn back on when it
is in its normal upright position.
• Your heater will automatically turn off
when the appliance has overheated.
This may be because there is something
covering the heater. Unplug the
appliance and wait 30 minutes for it to
cool. If there is no damage to the unit,
cord, or plug, plug the unit back in and
use as normal.
CLEANING
― ―
WARNING: ALWAYS TURN THE
HEATER OFF, UNPLUG THE POWER
CORD FROM THE ELECTRICAL
OUTLET AND ALLOW THE HEATER
TO COMPLETELY COOL DOWN
BEFORE HANDLING OR CLEANING IT.
WARNING: ALLOW THE HEATER TO
COOL DOWN FOR 2 HOURS (240
MINUTES) BEFORE CLEANING.
CAUTION: DO NOT ALLOW WATER
OR OTHER LIQUIDS TO RUN INTO
THE INTERIOR OF THE APPLIANCE,
AS THIS COULD CREATE A FIRE AND/
OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE THE HEATER.
• Do not attempt to clean the appliance in
any other way than that detailed by the
manufacturer.
Your Heater's Safety Guards:
• Unplug the appliance and let cool before
cleaning.
• Gently clean the outside surface and the
control panel with a damp, lint-free cloth.
• Clean the vents of the appliance with a
vacuum cleaner and the brush attachment
to avoid dust build-up.
STORAGE
― ―
• To store your product out of season, we
recommend using the original or similar
size box.
• Store in a clean, dry place away from direct
sunlight. Place out of reach of children.
English | 4