Protecting The Environment - Black and Decker KW1200E Traducción De Instrucciones Originales

Core box bit (5)
Core bit (6)
Ogee moulding bit (7)
Rounding over bit (8)
Dovetail bit (9)
Chamfer bit (10)
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! To minimize the danger of serious
personal injury, please switch off the tool power and
disconnect all plugs before adjusting or removing/
installing any accessory. Before reassembling the tool,
press and release the trigger switch to make sure the tool is
already switched off.
Warning! Before performing any maintenance on corded/
cordless power tools:
Lubrication
BLACK+DECKER tools are properly lubricated at the factory
and are ready for use.
Tools should be lubricated regularly every year depending
on usage. (Tools used on heavy duty jobs and tools
exposed to heat may require more frequent lubrication.)
This lubrication should be attempted only by trained power
tool repairperson's such as those at BLACK+DECKER service
centers
or in other qualified service personnel.
Cleaning
Warning! Regularly clean the ventilation slots in your tool
using a soft brush or dry cloth.
Warning! Never use solvents or harsh chemicals to clean
non-metal parts of the tool. These chemicals may weaken the
material of the parts. Use only mild soap and damp cloth to
clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into liquid.
IMPORTANT! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified organizations, always using identical
replacement parts. Unit contains no user service
able parts inside.
Optional Accessories
Warning! Since accessories, other than those
Fluting, engraving and
decorative edge moulding
Decorative edge moulding
Decorative edge moulding
Rounding over edges
Dovetail joints
Chamfer edges
(Original instructions)
offered by BLACK+DECKER, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only
BLACK+DECKER,
recommended accessories should be used with this product.
The performance of any power tool is dependent upon the
accessory used. BLACK+DECKER accessories are
engineered to
high quality standards and are designed to enhance the
performance of power tool. By using BLACK+DECKER
accessories
will ensure that you get the very best from your
BLACK+DECKER tool.
BLACK+DECKER offers a large selection of accessories
available at
our local dealer or authorized service center at extra cost.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
TYPE
Voltage Hz
Frequency Hz
Power W
No-Load speed /min (rpm)
Collet Size mm
Cord length
Level of sound pressure according to EN62841:
Sound pressure (L
pA)
Sound power (L ) 101 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Vibration emission Value (a
ENGLISH
220 - 240V
8000 - 28000
6mm, 6,35mm, 8mm
90 dB(A), Uncertainty (K) 3 dB(A)
) 6.5 m/s , uncertainty (K) 1.5 m/s
2
h
KW1200E
Type 01
50Hz
1200
2 meters
2
11