Kärcher G 2500 LH Manual De Instrucciones página 6

STEP 1:
Attach the handle to the frame of the
pressure washer. Align holes, insert
bolts, and tighten with knobs.
STEP 2:
Fasten the rubber grommets in the
nozzle holder.
STEP 3:
Mount the nozzle holder and the
gun/hose storage handle.
STEP 4:
Place the quick connect nozzles in
the nozzle holder.
6
English
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
STEP 5:
Attach the wand to the spray gun.
STEP 6:
Pull the spring-loaded collar of the
wand back to insert your choice of
quick connect nozzle.
STEP 7:
Release the collar and push the noz-
zle until the collar clicks.
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly
locked nozzle.
Make sure you hear a 'click' when in-
serting the nozzle tip into the wand.
Pull the nozzle to make sure it is
seated properly before operating
your unit.