Care And Maintenance; Remote Controls - Trevi SB 8320TV Manual Del Usuario

ENGLISH
NOTES ON USE
This is a precision electronic appliance; avoid using it in the following cases:
- Near strong heat sources, such as central heating plants or stoves.
- In very humid places such as bathrooms, swimming pools, etc.
- In very dusty places.
- In places subject to strong vibrations.
Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).

Do not block the air inlets.

If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorised service centre.

Before switching on the appliance, always check that the power cable and the connection cable are properly installed.


CARE AND MAINTENANCE

Use a slightly damp soft cloth for cleaning. Do not use solvents and abrasive substances.
IMPORTANT
This appliance has been carefully built to ensure long-lasting perfect performance. However, should any inconvenience occur, please contact your
local authorised TREVI Service Centre.
TREVI follows a policy of ongoing research and development. Therefore products may have different features from those described.
DESCRIPTION OF CONNECTORS/CONTROLS
1
Controls and sockets on the device
1. STANDBY button
2. SOURCE button, input selection
3. Key , play / pause, pairing operation in BT mode
//PAIR
4. Volume buttons (+ to increase volume, - to decrease the volume)
5. LED operation indicator (red = standby, orange = Aux In active, blue = Bluetooth
active)
On the back of the device
AC outlet. Socket for power supply AC230V~ 50Hz
AUX input. AUX IN jack 3.5mm stereo
USB service. Inactive input

Remote controls

6. STANDBY button
7. Volume buttons (+ to increase volume, - to decrease the volume)
8. MUTE button, activating MUTE function
/
9. Keys 9 :, select previous / next track
10. Key / / PAIR, play / pause, pairing operation in BT mode
11. AUX button, activation of the AUX IN
12. Key BT, Bluetooth activation
13. Keys EQ, EQ sound selection (Flat, Movie, Music)
REMOTE CONTROL BATTERY ACTIVATION AND REPLACEMENT
The remote control features a CR2025 battery.
To activate the remote control battery (supplied), remove the protective plastic tab.
To replace the battery:
1. Remove the battery compartment (see the picture in rear case of remote control).
2. Replace the battery with one of the same type (CR2025).
All manuals and user guides at all-guides.com
2 3
5
4
6
7
9
11
13
6
SB 8320TV
8
10
12