Assembly And Function - patura Tornado Master 5.0 Instrucciones De Montaje Y De Uso

Installation and mounting Instructions
2.
Safety
2.1 Behaviour in an emergency
In situations which could be dangerous to persons or equipment, the Tornado Master 5.0 must be stopped immediately. If
persons are injured, first aid must be started immediately and the rescue service must be informed.
2.2 Intended use of the machine
The Tornado Master 5.0 is used for setting up and taking down temporary fences with up to five rows. The fence posts in
the magazine are inserted into the ground by hand and the polytapes or polywires will unwind automatically and
attach to the fence posts by hand. When setting down the fence, the polytapes or polywires will be removed by hand
and then automatically rolled up. The posts will be removed from the ground by hand and placed in the magazine.
2.2.1 Requirements for the personnel
The Tornado Master 5.0 may only be used, installed, demounted and repaired by adequately trained personnel.
2.3 Possible incorrect use
Carrying out work that is not intended, including but not limited to: transporting persons on the unit; use of heavy ropes
or chains instead of polywires or polytapes for temporary fences.
2.4 Follow the operating instructions
This operating instruction is part of the Tornado Master 5.0. It must be strictly observed at all times. It must be kept in the
direct vicinity of the Tornado Master 5.0 and must be easily available for the user at all times.
2.5 Safety labeling at the machine
The Tornado Master is provided with a CE Sticker. That means that the manufacturer declares that the Tornado Master 5.0
complies with the EU regulations and a conformity procedure has been done.
3.

Assembly and function

3.1 Assembly
3.1.1 Main components
The Tornado Master 5.0 consists of a basic frame with fixing elements for a support device. The magazine for the posts
is rotatable and connected with the basic frame. The reels are attached to the basic frame. The supplementary reels from
PATURA Ref. 115111 are to be used as reels.
3.1.2 Operator stations
The operator stations are all around the Tornado Master 5.0 at the respective locations. The reel drive will be started by
a switch on the basic frame.
3.2 Functional description
The Tornado Master 5.0 is attached to the support device by catch hooks. The energy supply of the reels is made via the
support device. The Tornado Master 5.0 allows for setting up and down a temporary fence with up to five rows in a
simple pass. To start, the beginning of polytape or polywire has to be fixed to the starting post and will be wound down
under light tension while the support device is driven at low speeds. The operator only has to insert the posts to the
ground and attach the polywire or polytape to it.
Dismantling works in the same way, only in reverse order. Automatically winding up the polytapes or polywires is only
possible with the reel drive switched on.