Alarm Setting - König Electronic HAV-CR50-51 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
All manuals and user guides at all-guides.com
Operating the alarm

Alarm setting

1. Press & hold the ALARM 1 button more than 2 seconds, the "HOUR" & "ALARM
1" LED indicators will flash and then press the time set "UP" or time set "DOWN"
button for hour adjustment.
2. Press the ALARM 1 button to confirm the hour set. Then the "MINUTE" & "ALARM
1" LED indicators will flash and then press the time set "UP" or time set "DOWN"
button for minute adjustment. Press the ALARM 1 button again to confirm the
"ALARM 1" setting.
3. Press & hold the ALARM 2 button more than 2 seconds the "HOUR" & "ALARM
2" LED indicators will flash and then press the time set "UP" or time set "DOWN"
button for hour adjustment.
4. Press the ALARM 2 button to confirm the hour set. Then the "MINUTE" & "ALARM
2" LED indicators will flash and then press the time set "UP" or time set "DOWN"
button for minute adjustment.
5. Press the ALARM 2 button again to confirm the "ALARM 2" setting.
Setting the sound of the ALARM 1 and ALARM 2
Press the "ALARM 1" or "ALARM 2" button to set the sound of the alarm.
1. Press the "ALARM 1" button once, the "ALARM 1" of RED indicator will light on,
and the sound of "ALARM 1" in "BUZZER"
2. Press the "ALARM 1" button again, the "ALARM 1" of YELLOW LED indicator will
light on, and the sound of "ALARM 1" in "RADIO".
3. To cancel the "ALARM 1" press the "ALARM 1" button again, the "ALARM 1" LED
indicator will light off.
Stopping & resetting the ALARM
Press the POWER/ALARM RESET button once to stop the sound of the "ALARM 1"
or "ALARM 2" and it will automatic active after 24 hours.
Snooze operation
The SNOOZE function will temporary switch off the alarm for approximately 9
minutes, this is repeatable for a duration in one hour of the alarm cycle.
ALARM off
Alarm active - press the POWER/ALARM reset or SNOOZE button to stop the sound
first. Then press the "ALARM 1" or "ALARM 2" button till the ALARM indicators light
off. Alarm non-active- press the "ALARM 1" or "ALARM 2" button till the ALARM
indicators light off.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido