Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
CCT & WATTAGE SELECTABLE LED WALL
PACK WITH EMERGENCY BATTERY BACKUP
Models: 65-754, 65-762
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• To reduce the risk of fire, electrical shock or injury to persons; read and follow all
warnings and installation instructions before installing.
• All installation should be performed by a qualified electrician.
• To avoid electric shock, ensure power is turned off before installation or inspection.
All wiring must be installed in accordance with Electrical Code and local electrical code.
• To prevent fire, this fixture is rated for use with minimum 75°C rated supply wire.
• This product must be properly grounded.
• To avoid damage and/or product malfunction, do not modify the fixture or replace
accessories without confirming with the supplier first.
• Do not expose wiring to edges of sheet metal or other sharp objects.
• Suitable for outdoor/wet locations. Distance from ground should be more than 2m.
SPECIFICATIONS
Model
Watts
65-754
29W/40W/60W
65-762
INSTALLATION: Mounting Bracket
STEP 1: Turn power OFF.
Use a screwdriver to remove the
screws on both sides.
STEP 2: Open the fixture,
disconnect the connection
terminals, and remove the upper
cover of the fixture.
STEP 3: Use a screwdriver to
remove the plug.
STEP 4: Drill through the mounting
hole with an electric drill.
STEP 5: Attach EVA cotton pad
to bottom shell.
STEP 6: Thread the wire through
the bottom hole.
STEP 7: Lock the bottom shell on
the mounting bracket with screws.
STEP 8: Connect the wires, refer
to wiring diagram. (L = Black,
N = White, G = Yellow/Green).
STEP 9: Install the cover of the
fixture and connect the terminal
block.
STEP 10: Secure fixture with
screws. Installation is complete.
Turn power ON.
© Copyright 2021 Satco Products, Inc. 12/21 v1.1
CCT
Volts
3000K/4000K/
120V-277V
5000K
1
4
7
Operating
CRI
Temperature
-40°C to +50°C
80
(-40°F to +122°F)
2
5
8
10
1
65-754
14 3/8" W x 7 7/16" H x 9 3/8" D
(365mm W x 188mm H x 238mm D)
65-762
14 1/4" W x 9 5/16" H x 9 13/16" D
(362.3mm W x 237mm H x 249.8mm D)
3
6
9
Satco Products, Inc.
Brentwood, NY 11717
Publicidad
Manuales relacionados para Satco NUVO 65-754
Resumen de contenidos para Satco NUVO 65-754
- Página 1 N = White, G = Yellow/Green). STEP 9: Install the cover of the fixture and connect the terminal block. STEP 10: Secure fixture with screws. Installation is complete. Turn power ON. Satco Products, Inc. © Copyright 2021 Satco Products, Inc. 12/21 v1.1 Brentwood, NY 11717...
- Página 2 LED – (Grey) PG(Green) EM Driver EM Switch VH-(Blue) VL-(White) Photosensitive (Black) L(Black) Resistance V-(Black) N(White) V+(Red) Dim+(Purple) Dim+(Purple) G(Green) Dim-(Pink) Dim-(Pink) – Power Switch LED Driver Satco Products, Inc. © Copyright 2021 Satco Products, Inc. 12/21 v1.1 Brentwood, NY 11717...
- Página 3 • Girar el interruptor DIP a “OFF” (APAGADO), significa que la fotocélula está apagada. NOTA: Apague la alimentación antes del ajuste. La configuración predeterminada de fábrica para la fotocélula está en “ON” y 4000K para CCT. Satco Products, Inc. © Copyright 2021 Satco Products, Inc. 12/21 v1.1 Brentwood, NY 11717...
- Página 4 REMARQUE: Coupez l’alimentation avant de procéder au réglage. Le réglage par défaut en usine pour la photocellule est MARCHE et 4 000 K pour la température de couleur apparente. Satco Products, Inc. © Copyright 2021 Satco Products, Inc. 12/21 v1.1 Brentwood, NY 11717...