Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
To ensure the product a longer life and more efficient, please note:
• Fully charge the battery when first received.
• Fully charge the battery after each use.
• Fully charge the battery for 48h every 2 months.
JUMP STARTING
1. Turn ignition off before making cable connections.
2. Keep clear of fan blades, belts, pulleys and other parts that may cause injury.
3. Make sure the power switch is on the OFF position until clamps are connected to the
vehicle battery.
4. Connect POSITIVE (RED) clamp to POSITIVE (POS, P, +) ungrounded post of
battery.
5. Connect NEGATIVE (BLACK) clamp to vehicle chassis or engine block away from
battery
post.
6. Turn the power switch to the 12V or 24V position according to your car or truck.
7. Crank the engine for 3-5 seconds. If the engine does not start within 10 seconds, stop
cranking and wait at least 4 minutes before attempting to start the vehicle again. (This
permits the battery to cool down.)
8. After the engine starts, turn the power switch to the OFF position. Then disconnect
the NEGATIVE (BLACK) clamp and then the POSITIVE (RED) clamp in that order.
Always return the cables to their stored position.
9.
10. Recharge the jump starter as soon as possible after use.
CHARGING
Turn the power switch to 12V position!
Plug the adaptor into main supply and then insert the other end into the charger socket on
the back of jump starter. After charged, turn the power switch to OFF position.
CHECK INTERNAL BATTERY STATUS
Press on the "TEST" button; check the voltage of battery from the voltmeter.
VOLTAGE
BATTERY
CHARGER
CRANKING AMP
PEAK AMP
DIMENSIONS
SIZE
12V / 24V
2 x 28Ah
12V / 6A
12V / 2000A
24V / 1000A
12V / 4000A
24V / 2000A
540x390x840
35 Kg
MI03105-01
Publicidad
