SettinG UP and cleaninG
WARNING: Allows unplug the device before opening the collection
container.
NOTE: Always use the vacuum cleaner with the filter in place.
PRECAUTION: The suction aperture should be open, and free of
obstructions at all times. If not, the motor will overheat, possibly
resulting in damage to the device.
Cleaning
1. To open the dust reservoir, press the button and remove the dirt-
collection container.
Press the
release button
of dust tank
2. Remove the filter and clean it. To do so, rinse the filter in cold water
and wait until it has completely dried before putting it back in place.
3. Empty the dirt from the reservoir.
4. Carefully put the filter back into the dirt reservoir, making sure that
it is really dry.
5. Attach the dirt reservoir to the main body of the vacuum cleaner.
Take off
the dust
tank
21 |