Led Flash - i.safe MOBILE IS530.RG Guia De Inicio Rapido

4
POWER KEY: A long press switches the device on/off. A short press switches the stand-
by mode on/off.
5
FRONT CAMERA
6
ISM INTERFACE: Connection for approved accessories. Also see section "Connecting
approved accessories".
7
MAGNETIC CHARGER PORT: Connection for the Magnetic Charger Cable. Also see
section "Charging".
8
SIDE KEY RIGHT: Optional function, e.g. camera - function can be assigned via Button
App (system integrated).
9
CURRENT APPLICATION: Shows all open applications.
10
HOME KEY: Switch to the main screen.
11
BACK KEY: Go to the previous screen.
12
USB INTERFACE: Connection for the USB-C Cable or for connection to other devices.
Also see sections "Charging" and "Connecting approved accessories".
13
MICROPHONE
14
LOUDNESS CONTROL: Volume up/Volume down.
15
SIDE KEY LEFT: Optional function - function can be assigned via Button App (system
integrated).
16
SENSORS: Proximity sensor, light sensor.
17

LED FLASH

18
NOISE CANCELLING: Noise cancelling microphone.
19
LOUDSPEAKER: Loudspeaker for hands-free function.
20
BACK CAMERA
21
BATTERY
PREPARATION
The device has two slots for one SIM card each and one slot for a
microSD card up to a size of 128 GB. The slots are located in the bat-
tery compartment and are marked "SIM 1", "SIM 2" and "microSD".
Insert the SIM card into the slot.
Insert the microSD card into the slot provided.
Place the battery in the battery compartment.
Hand-tighten the screws using the Torx Screwdriver provided.
Check that the battery is seated correctly and securely.
SWITCHING ON
Press and hold the on/off key for about 3 seconds.
When turning on the device for the first time, follow the instructions on the screen.
EN 5