Technical Specifications; Safety Instructions - Auping Match 377 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
All manuals and user guides at all-guides.com
Type 388
1. Raise head support
2. Lower head support
3. Raise back section
4. Lower back section
5. Raise foot end
6. Lower foot end
7. Raise head support, back section and
foot end
8. Lower head support, back section and
foot end

1.3 Technical specifications

Drive motor (per motor)
- Input 230 V~ (depending on country and
model input 220/240/110 V~) 50-60 Hz/
145 W.
- DC motor 24 V, 75 W.
Maximum con tinuous operating time 2 minutes
per 20 minutes.
Handset
- Coiled flexible cable 24 V.
- Push buttons to adjust the head support,
back section and foot end of the mesh
base*.
Weight (example)
- Match, type 377, dimensions 90x200: 33 KG
- Match, type 379, dimensions 90x200: 35 KG
- Match, type 388, dimensions 90x200: 37 KG
* if applicable
_01PPD_3503 BinnenW.pdf - pag.13

2. Safety instructions

■ The Match mesh base must only be fitted by
an Auping specialist.
■ The Match mesh base is only suitable for
use in the home.
■ The Match mesh base operates on 24 V
low-voltage current.
■ Check that the voltage of the transformer is
the same as the mains voltage in the house.
■ Adjustable beds have moving parts. Make
sure that your limbs cannot become
trapped.
■ Only adjust the bed while you are lying on it.
Make sure that no children are under the
bed while it is being adjusted.
fig. 2
■ The mesh base is not a toy. Do not allow
children to play with the bed.
■ Do not use the bed as a trampoline or
stepladder.
■ The Match mesh base is not intended for
use by persons with a psychological com-
plaint or mental deficiency or children,
unless they have been properly instructed
how to use it and are aware of the risks.
■ Disconnect the bed from the power supply
before cleaning. Pull the plug out of the
socket.
■ Use an Auping Match mesh base in combi-
nation with an Auping mattress.
■ Only place the bed in a dry room. In view of
the electrical components it is not permit-
ted to place the bed in a damp room.
LET OP !!! Lage resolutie!
GB3
June 12, 2008

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Match 379Match 388

Tabla de contenido