Attaching Other Displays - Clevo M570TU Guia Del Usuario

Concise User's Guide

Attaching Other Displays

Note that you can use a DVI cable connected to the DVI-Out port, or an HDMI (High-Definition Multimedia Inter-
face) cable connected to the HDMI-Out port to connect an external display (if you are using an older type of monitor
you can use a converter to convert the signal from DVI to VGA). See your display device manual to see which formats
are supported.
Configuring an External Display in Windows Vista
1. Attach your external display to the DVI-Out Port or HDMI-Out port, and turn it on.
2. If a New Display Detected window does not appear in Windows Vista, go to the Windows Mobility Center control panel
(Mobile PC > Adjust commonly used mobility settings) and click Connect display.
3. Click on any of the buttons to configure the displays to your preferences, or click Display Settings (in the New Display
Detected window) to access the control panel.
18 - Attaching Other Displays
All manuals and user guides at all-guides.com
Figure 9 - New Display Detected