Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performing this.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by D
WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
MAXIMUM RECOMMENDED CAPACITIES
Steel twist bit
Auger
Self-feed
Spade
Wood holesaw
Steel holesaw
Repairs
The charger and battery pack are not serviceable.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a D
or a D
WALT authorized service center. Always use
e
identical replacement parts.
Protecting the Environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions.
WALT
e
1/2" (13 mm)
5/8" (16 mm)
1-1/2" (38,1 mm)
3" (76,2 mm)
1-1/2" (38,1 mm)
5" (127 mm)
4" (101,6 mm)
WALT factory service center
e
spECIFICaTIoNs
DW130V-B3
Voltage
120V~
Power
710 W
Frequency
60 Hz
Drill Capacity
1/2" (13 mm)
No load Speed no 0–550/min no 0–550/min no 0–550/min
ENGlIsH
DW130V-B2
DB130V-AR
220V
220V
710 W
710 W
60 Hz
50 Hz
5/8" (16 mm)
1/2" (13 mm)
19
Publicidad
