9&1 70051 Instrucciones De Uso página 13

f) Appropriately. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothing, jewelry or long hair can be caught on moving parts.
g) If there are devices for the connection of extraction and dust collection devices, make sure they
are connected and used correctly. Use of these devices can reduce dust-related risks.
4) Use and care of power tools
a) Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate it was designed for.
b) Do not use the power tool if the switch does not rotate "closed" and "open". Any power tool that
can not be controlled with the switch is dangerous and must be repaired.
c) Unplug the power supply and / or battery before making any adjustments, replacing
accessories, or storing power tools. Such safety precautions reduce the risk of accidental starting
of the tool.
d) Store idle power tools out of the reach of children and do not allow the power tool to be
operated by persons unfamiliar with the tools or with these instructions. Power tools are dangerous
to untrained users.
e) Keep power tools. Check that moving parts are not misaligned or locked, that there are no
broken parts or other conditions that could affect the operation of power tools. Power tools are
repaired before use, when damaged. Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less prone to jamming and easier to control.
g) Use the power tool, accessories and tool tips, etc. In accordance with these instructions and
taking into account the working conditions and the work to be carried out. Use of the power tool for
applications other than those intended may cause a hazardous situation.
5) Technical service
a) Have your power tool serviced by qualified service personnel using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
6) Safety instructions for boring screwdrivers
Hold the tool by insulated gripping surfaces when performing an operation where the pressure
accessory can touch hidden wiring or its own power cord. Pressure fittings touching an "active"
cable may cause the exposed metal parts of the tool to become "active" and the operator may be
subjected to an electric shock.
7) Additional safety information
a) Secure the workpiece. A workpiece fastened with fastening devices, or in a vice, is held much
safer than with the hand.
b) Wait until the power tool has been stopped before depositing it. The tool can get caught and
lose control over the power tool.
c) Immediately disconnect the power tool if the tool is blocked. Be prepared for the reaction that
causes the backlash to block. The tool locks if the power tool is overloaded or is tipped on the
workpiece.
d) Use suitable scanning devices to detect hidden conductors or pipes. Contact with electrical
conductors may cause a fire or electrocution. Damage to a gas line may cause an explosion. The
drilling of a water pipe can cause property damage.
e) Hold the power tool firmly. When tightening and loosening screws, abrupt reaction pairs may
occur.
f) Use the auxiliary handle (s), if supplied with the tool. Loss of control can cause personal injury.