Introduction; Specifications; Items Required For Operation; Glossary - Merlin PULSAR 150 Manual De Instrucciones

Introduction

Specifications

Items Required for Operation

8 * AA Batteries for the Transmitter

Glossary

Landing gear
- legs on the underside of helicopter.
Rotor
- High speed rotating blades used to lift the helicopter into the air.
Throttle
- A control function to adjust the speed of the rotating blades & height of the helicopter.
Rudder
- A control function to turn the helicopter.
Cyclic Controls
- Control functions to move the helicopter in flight.
Fuselage
- Main body of the helicopter containing motor, receiver, speed control, servos and battery
Gyro
- An electronic stabiliser built into the helicopter to assist flight.
LED
- A coloured indicator light.
Swash Plate -
Rotating plate below the rotor that adjusts the blade angles.
2
All manuals and user guides at all-guides.com
Main Rotor Diameter 340mm
Fuselage Length 410mm
Flying Weight 230g
Motor 180 Size Brushed
Battery 7.4V 800 mAh Li-Po Battery
Transmitter MTX-43 35 MHz FM 4 Channel
Receiver MRX-43 35 MHz FM 4 in 1 Board
Servos 2 x Micro Servos
Charger Mains 240V / 8.4V 500mAh