aarke CARBONATOR 3 Guia Del Usuario página 6

EN
User Guide EN
GAS CYLINDER INSTALLATION
Remove the spill tray cover and carefully lay the Aarke Carbonator on its side with the
lever facing upwards.
1
2
Unscrew the plastic seal from the top of the gas cylinder, and carefully insert it into the Aarke
Carbonator through the hole at the bottom. Don't drop the cylinder into the hole. When you feel
it reach the top, begin to screw the cylinder in with a clockwise motion until fastened. Be careful
not to screw it in too hard, as this could rupture the threads holding the cylinder in place.
When replacing the gas cylinder, carefully lay the Aarke Carbonator on its side with the
lever facing upwards. Unscrew the cylinder with a counterclockwise motion and carefully
remove it from the compartment.
1
2
CO2 Gas Cylinder
The Aarke Carbonator is compatible with standard gas cylinders
425 g
approved for use with sparkling water machines from all major
brands (with the exceptions of Australia and New Zealand). Other
gas cylinders may seem to work, but could damage the machine or
cause a safety risk with prolonged use.
3